Video: 1967 Ford Mustang Fastback Sees the Light of Day After 40 Years in Storage
The muscle car’s new owner plans to use the recovered Mustang for parts
10/02/2023
The muscle car’s new owner plans to use the recovered Mustang for parts
Automobile collector and restorer Dennis Collins, who also appeared on the Discovery Channel’s Fast N' Loud with Richard Rawlings, recently shared his trip to Wichita, Kansas, to uncover a 1967 Ford Mustang Fastback that had been stored in a covered building for four decades.
The red-on-red pony car was reportedly parked since the 1980s until the owner decided to let it go to Collins. The Mustang isn’t all that uncommon, being one of 71,042 fastbacks built for 1967, but it retains its numbers-matching 4.7-liter 289-cid C-code engine that was factory rated for 200 horsepower and 282 pound-feet of torque when new.
The unrestored Mustang is found to be in surprisingly good condition despite being parked for around 40 years. While most classic cars would show obvious rust throughout the body panels, the covered garaging location prevented escalated damage from the elements. The Candy Apple Red exterior paint still shows through the layers of dust. The body panels, for the most part, appear to be solid. The pony car's matching red interior features a desirable Deluxe option but the upholstery shows rodent damage and deterioration, typical of the classic "barn find" type vehicles.
Instead of selecting this car as a candidate for restoration, Collins states he plans to use some of the parts from the car for a few Shelby models that he is already restoring.
Watch as the team battles with stuck brakes to pull the resting Mustang into the light of day, plus some bonus footage of more vintage finds.
Rescued: Hoarded 1967 Candy Apple Red Mustang Fastback!youtu.be
The hat atop the roll bar belonged to beloved Tom Jobe, whose emotional memorial service culminated in a blastoff of ashes and fire from the headers. Tom had personally guided construction of an early Chrysler Hemi that replicates the 100-percent-nitro combination developed in 1963 with partner Bob Skinner. Though neither Santa Monica resident ever learned to ride local waves, their unique combination of youth, longish hair and early struggles earned a derisive nickname from fellow racers: "those Surfers."
This tribute slingshot was built as an exhibition "cackle car" by superfan Bob Higginson (foreground), who became a close friend of Jobe's during the years-long reproduction. Another old pal, writer Cole Coonce, shot video of the brief cackle, which you can view below:
Date: November 2019
Location: Prietive Group; Torrance, California
Source: Wallace Family Archive
Sometimes, it is up to you to fix what the manufacturer failed to get right. Remember when bright colors, big-blocks, cartoon characters and tire-melting power was the normal for Chrysler? In 1970, you could go to your local Dodge dealership, order a Hemi-powered Charger painted in any number of blindingly bright hues, row your four-speed with a Pistol Grip shifter, and you could even option it out to be a luxurious experience with the SE trim package. By 1975, those days were over. The Charger was still around, but it looked nothing like the lithe, lean machine of five years ago and forget ordering a four-speed altogether because it wasn’t on the menu. If you want that third pedal, you must install it yourself.
1978 Dodge Monaco A38 tribute
Photo: Hemmings Archives
Sure, the police vehicles still had teeth, but the muscular B-body offerings that Mopar had been known for were pretty much gone. Instead, the company had chased the Chevrolet Monte Carlo into personal luxury territory and the audience knew it. You could still order a watered-down 360 or even the 400-cu.in. big block, but you were pretty much stuck with the 727 TorqueFlight automatic transmission. Would you like your PRNDL on the column or on the floor, sir? It didn’t matter if you were looking at a Charger, a Road Runner, a Coronet or a Fury... the likelihood that you’ll find one with three pedals is about the same as finding a unicorn munching on the grass in your backyard. While production numbers aren’t easy to find, after 1974 a four-on-the-floor ceased to exist. If you wanted to shift for yourself in a 1975-1979 B-body Mopar, you were stuck with the A230 three-speed…on the column. Suffice it to say that there were few takers for a Slant-Six or 318-powered stripper Plymouth Fury, Dodge Coronet or Monaco.
This 1976 Dodge Charger Daytona is typical of what you would normally find: its asthmatic 360 small-block was mated to an A727 TorqueFlite three-speed automatic transmission. Solid, stable, bulletproof… and boring. As the owner of the Charger, I’ll admit that there was no real reason to even perform this swap aside from my usual reason of "because I can". The Charger’s long 2.41 rear gears made for excellent Interstate driving and returned surprisingly decent fuel economy in return. Why mess with what works?
This 1987 Dodge Diplomat was a cop car from Austin that had been built into a stout performer. It featured a warmed-up 360 and an A-833 overdrive four-speed manual transmission.
Photo: Bryan McTaggart
To understand why I would take a 67,000-mile survivor and go straight under the knife with it, you need to know of another manual-swapped Mopar from my past: a 1987 Dodge Diplomat. Converted by Steve Knickerbocker, this AHB (police package) Dodge packed a warmed-up 360 and an A833 four-speed, a combination that Chrysler only put into maybe a couple hundred M-bodies prior to 1980, and without question not after 1983 in any market. I bought the car from him in 2005, had it painted Midnight Blue Metallic, threw on chrome wheels, and proceeded to drive it as if I had bought a stock car. Having owned seven other FMJ-body Chryslers throughout the years, the Diplomat was an absolute stormer by comparison. But it wasn’t so much that it had power…it was that I had control of that power with the four-speed that made the difference. I wasn't held to the lazy shifting patterns of 1970s Chrysler transmission engineers, and I had an overdrive gear to use.
The author's Charger, parked next to Matt Graves' 1983 LSX/six-speed Cadillac Coupe de Ville.
Photo: Matt Graves
Then there is a friend of mine: Matt Graves from American Powertrain. Matt is the owner of the “Chicken Coupe”, a 1983 Cadillac Coupe de Ville that is packing a 427-cu.in. LS mill, enough suspension tweaks to allow the big Caddy to keep up with a Corvette in the corners, 14-inch Baer brakes, and a six-speed. And it retains the plush velour interior that the original buyer was sold on. Call it Pro Luxury. It works better than it has any right to. It is hard to say that you own a Dodge Charger with positivity in your voice when a brougham-tastic 1980s Cadillac can stomp it into the dirt at a moment's notice.
At the end of 2023, having rid myself of the last manual-transmission car I owned (an absolute money pit of a Chevrolet Cruze) years prior, I decided that the Charger had to have a manual transmission. It didn’t matter if the car had 170-ish horsepower on tap from a smogger small-block… I can build the engine later. Having a third pedal became a priority. There is just one problem: this is a platform with about zero aftermarket support. How well would this work out?
Before any transmission can be swapped in, the A727 TorqueFlite automatic transmission has to be removed. Overall, the automatic is in great condition. It just needs to be re-sealed anywhere a seal exists.
Photo: Bryan McTaggart
Before I was going to Sawzall a hole in the floor of my car, research had to be done. I wanted to know how difficult this swap would prove to be. I wanted to keep any kind of fabrication to a minimum, I wanted to keep the cutting to a minimum, and I wanted to keep the appearance of a “theoretically possible” look… In the end, I want the interior to look factory-possible instead of backyard butchery. I also wanted to have a minimum of five forward gears for the sake of Interstate drivability, regardless of what is going on in the engine bay. Your car can sound as mean as all get-out, but there are few things more irritating than getting passed by a Kia Soul doing 85 MPH while you are stuck in the slow lane, turning 3,000 RPM and barely doing 65 MPH.
Before anything got cut, numerous test-fits were made and patterns were marked using a nearly-dead shoe polish marker. The square is the hole for the shifter, the dot above marking the end of the tailshaft.
Photo: Bryan McTaggart
I leapt into this project with a lot of assumptions. I assumed that the 1975 re-skin of the B-body lineup was more-or-less a visual change and not a complete re-engineering of the 1971-1974 B-body platform. This opened the option of some parts from the more muscular Mopar nameplates, like Charger, Road Runner, GTX and Super Bee. Additional research suggested that the firewall of the B-body was shared with the E-body twins, the Dodge Challenger and Plymouth Barracuda. This project looked very plausible on paper.
A Malwood USA hydraulic clutch pedal and a manual transmission/brake pedal for an E-body (Challenger/'Cuda) compose the pedal assembly for the Charger. The pedals were fit prior to removing the interior, as we wanted to ensure that they would actually work before we began cutting holes into the car.
Photo: Bryan McTaggart
After some discussions with Graves, I made two purchases prior to any transmission purchase: a floor-shift column from a dearly departed 1979 Chrysler 300 and a set of 1971-1974 E-body manual transmission pedals. While I restored the column, I had the pedals shipped directly to Graves to see if they would play nicely with a hydraulic throwout bearing. By early December, I had a box filled with pedal parts and a Malwood USA Under Dash Hydraulics system dropped off on my porch. This was my cue, and for Christmas, I bought myself a TREMEC TKX with a 2.87 first gear and a .68 fifth gear.
Once we figured out where the shifter would be located, we drilled two holes for the "forward" and "rearward" shifter mounts underneath the car. With some measuring, we drew our cutting pattern in the interior and cut the floor out. Other than some minor clearance grinding on the sides, we were pretty spot-on.
Photo: Bryan McTaggart
In addition to the transmission that I had bought, American Powertrain sent other parts to see how plausible a 1975-1979 B-body manual transmission swap could be. Within a few days’ time, the pedals were installed, a process that only requires the lower HVAC vent tube and the front seat to be removed… both in the name of making space for you to work in.
My next task was to prepare the new floor-shift column for the Charger. To make a long story at least a bit shorter, here is what I did: I swapped the wiring, steering shaft, and ignition key cylinders from the original column to the new one, painted the outer body, and installed the Tuff Wheel adapter and wheel that I recently had restored by Craft Covers.
Here, we mocked up where the shifter would be for the two main shifter locations offered by the TKX. As you can see, the forward location was immediately ruled out due to interference between the Pistol Grip shift handle (and my hand) against the lower dash and the radio.
Photo: Bryan McTaggart
To properly begin the transmission fitment process, the carpet and the sound deadening that will be in the way of a shifter hole needs to be removed. Aside from presenting an opportunity to clean nearly fifty years’ worth of detritus from the carpet, it also brought to light the 99.5% complete broadcast sheet for the Charger. Having removed that little note of history, the Charger was placed upon 3-ton jack stands and ramps and the A727 TorqueFlite was removed from the car.
Numerous test-fits were performed to make sure that we had the optimal location for the shifter hole for our TKX before we broke out our grinder and started cutting. In the end, we cut a 12 x 4-inch hole in the floor that, while a bit oversized for the final product, allowed just enough room to very work from above and below. In addition, a section of a floor brace that was both in the way of the shifter and redundant due to the transmission crossmember was cut away as well. Once trimming was complete, a test-fit of the transmission with the bellhousing attached showed that while tight, the entire assembly would fit. With that, the new flywheel, pilot bearing, and clutch were installed, and it was time to bolt everything together for the last time.
Photo: Bryan McTaggart
Photo: Bryan McTaggart
Putting a dollar figure to this build is going to be difficult. Part of this deal is an exchange with American Powertrain – for the help prototyping a potential new platform for them and provide post-installation advertising options, they supported this swap with parts. The other thing to consider is the “handshake deals” that were worked out between friends and contacts. Being up-front, I am not going to fully disclose every cost I paid, nor will I highlight everything that I did not pay money for. But for the sake of transparency, here is an idea of what you would expect to spend to get this project started.
In addition to the transmission swap, we chose to upgrade the Chrysler 8.25 rear axle, swapping in a set of 3.73 rear gears and a limited-slip differential. Big thanks to Ron's Machining Service and Seth at Rears and Gears for their help with the re-gearing project.
Photo: Bryan McTaggart
STOCK: Chrysler A727 TorqueFlite
1st/2.54....2nd/1.54....3rd/1:1....Reverse/2.21....Rear Axle Ratio/2.41
MODIFIED: TREMEC TKX (Ford-style)
1st/2.87....2nd/1.89....3rd/1.28....4th/1:1....5th/0.68....Reverse/2.56....Rear Axle Ratio/3.73
Note: TREMEC TKX is offered in both Ford and GM-style bellhousing bolt patterns and is offered with close and wide ratios, with numerous gear ratio options. First gear can be as low as 3.27 or as high as 2.87 and overdrive can be as low as 0.81 or as high as 0.68. There are also two Reverse ratios: 3.00 and 2.56.
American Powertrain
931-646-4836
www.americanpowertrain.com
Mark Muffler Shop
270-781-6722
www.markmufflershop.com
Ron's Machining Service
800-694-3098
www.ronsmachiningservice.net
Rears and Gears
423-963-2671