DFI Lanparty UT NF680i LT SLI-T2R Motherboard
By ccokeman
-
Specifications:
Listed below are the specifications for this motherboard.
CPU
- LGA 775 socket for:
- Intel Core2 Quad, Intel Core2 Extreme, Intel Core2 Duo, Intel Pentium D or Intel Pentium 4
- Intel Enhanced Memory 64 Technology (EMT64T)
- Enhanced Intel SpeedStep Technology (EIST)
- Intel Hyper-Threading Technology
- 1333*/1066/800MHz FSB
- *Available on CPUs that support 1333MHz FSB
Chipset
- NVIDIA nForce 680i LT SLI MCP
- Northbridge: NVIDIA 680i LT SLI
- Southbridge: NVIDIA MCP55P
Memory
- Four 240-pin DDR2 DIMM sockets
- DDR2 533, DDR2 667 and DDR2 800 DIMMs
- Dual channel (128-bit wide) memory interface
- Up to 8GB system memory
- Non-ECC x8 and x16 unbuffered DIMMs
- NVIDIA SLI-Ready Memory with EPP
BIOS
- Award BIOS
- MOS Reloaded
- CPU/DRAM overclocking
- CPU/DRAM/Chipset overvoltage
- 8Mbit flash memory
Power Management
- ACPI and OS Directed Power Management
- ACPI STR (Suspend to RAM) function
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-LAN
- RTC timer to power-on the system
- AC power failure recovery
Hardware Monitor
- Monitors CPU/system/chipset temperature
- Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/Vdimm/Vchip voltages
- Monitors the speed of the cooling fans
- CPU Overheat Protection function monitors CPU temperature during system boot-up
Audio
- Karajan audio module
- Realtek ALC885 8-channel High Definition Audio CODEC
- 6 audio jacks
- 1 CD-in connector
- 1 front audio connector
- DAC SNR/ADC SNR of 106dB/101dB
- Full-rate lossless content protection technology
- S/PDIF-in/out interface
LAN
- NVIDIA MCP55P integrated with Gigabit MAC (Media Access Control) technology
- Two Vitesse VSC8601 Gigabit Phy chips
- Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards
- NVIDIA DualNet® technology
IDE
- One IDE connector allows connecting up to two UltraDMA 133Mbps hard drives
- Serial ATA with RAID
- Six Serial ATA ports supported by NVIDIA MCP55P
- SATA speed up to 3Gb/s
- RAID 0, RAID 1, RAID 0+1 and RAID 5
- Two Serial ATA ports supported by Silicon Image SiI 3132
- SATA speed up to 3Gb/s
- RAID 0, RAID 1 and RAID 0+1
- IEEE 1394
- VIA VT6307
- Supports two 100/200/400 Mb/sec ports
Rear Panel I/O Ports
- 1 mini-DIN-6 PS/2 mouse port
- 1 mini-DIN-6 PS/2 keyboard port
- 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
- Karajan audio module (6 audio jacks)
- 1 IEEE 1394 port
- 2 RJ45 LAN ports
- 6 USB 2.0/1.1 ports
I/O Connectors
- 2 connectors for 4 additional external USB 2.0/1.1 ports
- 1 connector for 1 external IEEE 1394 port
- 1 connector for 1 external serial port
- 1 connector for the Karajan audio module
- 1 front audio connector (on the Karajan audio module)
- 1 CD-in internal audio connector (on the Karajan audio module)
- 1 S/PDIF connector for optical cable connection
- 1 IrDA connector
- 1 CIR connector
- 8 Serial ATA connectors
- 1 IDE connector
- 1 floppy connector
- 1 24-pin ATX power connector
- 1 8-pin 12V power connector
- 2 4-pin 5V/12V power connectors (FDD type)
- 1 front panel connector and 6 fan connectors
- 1 diagnostic LED
- EZ touch switches (power switch and reset switch)
Expansion Slots
- 3 PCI Express x16 slots
- SLI technology - 2 x16 slots both operate at full-bandwidth 16 lanes
- 3rd x16 slot for Physics card operates at x8 bandwidth
- 1 PCI Express x4 slot
- 3 PCI slots
PCB
- ATX form factor
- 24.4cm (9.6") x 30.5cm (12")